PTFE Sheet
TFE Sheet USA05

Molded PTFE Sheet will serve well in a wide range of temperatures from (-)180C to (+)260C. With a wax-like surface to which hardly anything sticks. Molded PTFE Sheet has the lowest coefficient of friction of all known solid materials, and also has the best electrical properties of all plastics, including high arc resistance.

PTFE is a fluorocarbon. It offers superior heat resistance (up to 500° F / 260°C) coupled with excellent chemical resistance and lubricity. Very few materials will stick to it. PTFE is inert to almost all chemicals, cannot be dissolved, and exhibits no moisture absorption. Typical applications include chemical mixing rod, bearings, gaskets and diaphragms in meters, chemical pump liners, bushings, and containers for corrosives, valve seats, balls, thrust washers, seal rings, transformers, capacitors, relays and electrical push rods. PTFE is also being used widely in the food and medical industries.



Meets or Exceeds AMS 3667 / ASTM D 3294

1500 psi Tensile Strength

200% +/- Elongation @ Break


TFE Sheet

Standard Sheet Sizes shown below are for 1/16”, 1/8”, 3/8” 1/2” 3/4”, 1”,  1-1/2”, 2”, 2-1/2” and 3” Thickness. Due to the current volatility of the Oil-based Chemical Marketplace, we are provided prices by quotation only.

Please contact us via email and provide us with  your desired  Sheet Size and Thickness requirements.

12” x 12” Virgin PTFE Sheet

36” x 36” Virgin PTFE Sheet

24” x 24” Virgin PTFE Sheet

48” x 48” Virgin PTFE Sheet

 Please use our “Contact Us” page for quotes.

[] [PTFE Facts] [Contact Us] [Our Store] [Expanded Joint Sealant] [Thread Sealant Tape] [PTFE O-Rings] [PTFE Sheet] [Teflon® Sanitary Gaskets] [Specialties]