Expanded Joint Sealant

Readi-Seal™Expanded PTFE Joint Sealant
The Universal Gasketing Material ... On A Spool !

valve2
USA03

Readi-Seal™ Expanded PTFE Joint Sealant is a soft, compressible gasket material made of 100% virgin expanded PTFE. It is a versatile “form-in-place” material that will conform to almost any sealing surface. When compressed, it forms a hard, thin ribbon that fills-in surface irregularities, while creating an extremely tight seal. It has the capacity to withstand a wider variety of chemical environments, temperatures and pressures than any other soft gasketing material.

Readi-Seal™ Expanded PTFE Joint Sealant  can be easily used just about every accessible joint that features a flat or serrated sealing surface where the joining of the surfaces is accomplished through bolt force. With ease of installation and removal without scraping or grinding, it is a highly versatile and cost-effective solution to a wide variety of demanding sealing applications.

Features

  • Form-in-Place - conforms to any surface, including rough, pitted, scratched and damaged. Excellent on warped flange surfaces.
  • Flexible - can be installed on round, oval, rectangular and complex surfaces.
  • Chemically Resistant – made without fillers or binders,  100% pure virgin Expanded PTFE Readi-Seal™ exhibits superior chemical inertness.
  • Adhesive-Backed – the convenient adhesive strip and peel-off backing allow for easy installation on both horizontal and vertical surfaces.

Readi-Seal™ Expanded PTFE Joint Sealant has an Unlimited Shelf Life, shows No Age Deterioration, and Resists Creep & Cold Flow.

Specifications

  • Pressure x Temperature:     350,000
  • Temperature Range:             -450 F to 600 F
  • Pressure Range:                   30 ins. hg to 3,000 psi
  • pH Range:                                0-14

FDA Compliance

PTFE

21 CFR 177.1550

ADHESIVE

21 CFR 175.105

ASTM Testing

F36

 Compressibility 64-69%

F38

Creep Resistance 38-40%

Recommended Applications

  • Raised Face and Flat Faced Flanges
  • Metal, Plastic and Glass-Lined Flanges
  • Rough, Scratched, Pitted and Otherwise Damaged Flanges
  • Round, Oval, Rectangular, Complex and Irregular Flanges
  • Pump and Compressor Housing Flanges
  • Boiler and Pressure Vessel Manholes and Handholes
  • Heat Exchangers
  • Miscellaneous Lids, Access Plates, Ducts, Hatches, etc.
comeshop

Use the “ Drop-Down” Menus below to select the Size and Length you require then click on the “ADD TO CART ” button to add that item to your shopping cart.

Readi-Seal™ Expanded PTFE Joint Sealant

valve3
1/8" Readi-Seal
valve3
3/16" Readi-Seal
valve3
1/4" Readi-Seal
valve3
3/8" Readi-Seal
valve3
1/2" Readi-Seal
valve3
5/8" Readi-Seal
valve3
3/4" Readi-Seal
valve3
1" Readi-Seal
shop
[TefPro.com] [PTFE Facts] [Contact Us] [Our Store] [Expanded Joint Sealant] [Thread Sealant Tape] [PTFE O-Rings] [PTFE Sheet] [Teflon® Sanitary Gaskets] [Specialties]